The store will not work correctly in the case when cookies are disabled.
Trans-Dapt Engine Oil Pan Kit Stamped Rear Sump 7 qt 6 in Deep Single Fil (181)
Trans-Dapt Engine Oil Pan Kit Stamped Rear Sump 7 qt 6 in Deep Single Fil (183)
Trans-Dapt Engine Oil Pan Kit Stamped Rear Sump 7 qt 6 in Deep Double Fil (182) 0182
MPN: 0182
|
RPI: 2257053
Trackable Shipping
Australia Wide
Handling Time
7-10 Business Days Handling Time
(Prior to Dispatch)
Return Policy
No Return (Unless Manufacturer Defect)
Click & Collect (no postage cost)
Unit 1/25 Bearing Road, Seven Hills, NSW, 2147
Ready-to-pickup: 7-10 Business Days*
*You'll receive a notification when your order is ready for pickup. For store details and opening hours, click
here
| Brand |
|
| GTIN |
086923001829 |
| Manufacturer Part Number |
0182 |
| Handling Time |
7-10 Business Days |
| Return Policy |
No Return (Unless Manufacturer Defect) |
| Warranty |
Manufacturer Warranty |
| Baffled |
Yes |
| Bypass Mounting Style |
No Bypass Adapter |
| Capacity |
7 Qts. |
| Color |
BLACK |
| Construction |
Stamped |
| Contents |
Pan, Pickup,Remote Filter Base, Oil Lines, Fittings, Nipple, Gaskets & Hardware |
| Crank Shaft Wiper Included |
No |
| Depth |
6 in. at Rear Sump |
| Dipstick Provision |
No |
| Drain Plug Thread Size |
1/2 in.-20 |
| Engine |
Chevy LS Series |
| Engine Manufacturer |
Chevrolet |
| Engine Notes |
4.8L, 5.3L, 6.0L GM LS Series Engines |
| Engine Oil Cooler Return Fitting |
No |
| Fastener(s) Included |
Yes |
| Filter Bypass Included |
No |
| Filter Bypass Style |
Not Required |
| Filter Nipple Thread Size |
3/4 in.-16 |
| Finish |
ASPHALT BLACK |
| Finish Type |
Electro-Deposit |
| Fitting Material |
Brass |
| Fitting Quantity |
4 |
| Fitting Thread |
-10 AN |
| Fitting Type |
Hose Barb |
| Gasket Or Seal Included |
Yes |
| Hardware Included |
YES |
| Hose Connection Type |
Push Lock |
| Hose ID |
1/2 in. |
| Hose Length |
30 in. |
| Hose Material |
Flame Resistant Nitrile/Rubber |
| Hose OD |
0.75 in. |
| IMPORTANT! |
NOT FOR DIESEL, MARINE OR RACE USE! |
| Installation Hardware Included |
Yes |
| Kicked Out |
Yes |
| Kickout Position |
Driver and passenger side |
| Kit Type |
LS Swap Filter Integration Kit & Oil Pan |
| Length |
8-3/8 in. |
| Material |
Steel Pan/Cast Aluminum Filtration |
| Nipple Included |
Yes |
| Oil Filter Compatibility |
PH8A or Equivalent (or equivalent) |
| Oil Line Kit Included |
Yes |
| Oil Pan Bolts Included |
Yes |
| Oil Pan Capacity |
7 Qt. Capacity |
| Oil Pan Depth (in) |
6 in. |
| Oil Pan Finish |
Black |
| Oil Pan Material |
Steel |
| Pan Capacity |
7 Qts. |
| Pickup # |
2524 |
| Pickup Included |
Yes |
| Plug Included |
Yes |
| Port Size |
-10AN |
| Pressure Rating |
300 PSI |
| Race Only |
No |
| Remote Base Filter Size |
PH8A (or equivalent) |
| Remote Filter Base Style |
Dual Filter; Horizontal Port |
| Replacement Gasket Set |
4336 |
| Replacement Nipple |
1034 |
| Replacement Oil Pan |
0171 |
| Single or Dual Filter |
Dual |
| Stroker Clearanced |
No |
| Sump Dimensions |
6 in. Deep, 10.375 in. Wide, 8.375 in. Long |
| Sump Location |
Rear |
| Sump Style |
Wet Sump |
| Type |
Oil Pan with Remote Filter Kit |
| Width |
10.375 in. |
| Windage Tray Included |
No |
Trans-Dapt Engine Oil Pan Kit Stamped Rear Sump 7 qt 6 in Deep Double Fil (182)
Engine Oil Pan Kit - Stamped - Rear Sump - 7 qt - 6 in Deep - Double Filter - Horizontal Port - Gasket / Hardware / Oil Filter Relocation System / Pickup - Steel - Black Painted - GM LS-Series - GM F-Body 1967-69 - Kit
