Proflow Distributor Electronic Conversion Kit Pertronix Fits Ford PFEID1281
MPN: PFEID1281
|
RPI: 3280353
$184.25
Trackable Shipping
Australia Wide
Handling Time
3-5 Business Days Handling Time
(Prior to Dispatch)
(Prior to Dispatch)
Return Policy
30 Days Return
Click & Collect (no postage cost)
Unit 1/25 Bearing Road, Seven Hills, NSW, 2147
Ready-to-pickup: 3-5 Business Days*
*You'll receive a notification when your order is ready for pickup. For store details and opening hours, click here
Proflow Distributor Electronic Conversion Kit Pertronix Fits Ford
Proflow /Pertronix styleelectronic ignition conversion kit with fit all Autolite sigle point distributors typically fitted to all 60's and early 70's Fords
This kit is a all inside the distributor kit and is ideal to use for the customer who wants to upgrade to a stronger spark with no maintenance but still retain the original distributor and factory look. This kit is also compatible to use with your original Yellow top coil or if you want to increase the spark energy further use the Pertronix Flame thrower coil, part number SDR-IGN-40011
Note : Designed to use points type coil with a minimum of 1.5ohms primary resistance. Failure to use the correct coil will damage the unit and void warranty
- Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
- 2:1 improvement over "points" in current fall time for increased coil output.
- Rotating cobalt magnets trigger a Hall Effect integrated circuit . ...no points to burn, ...no moving parts to wear out.
- Epoxy molding makes our module impervious to dirt, oil, grease and moisture.
- Stable timing ...no need for any adjustments.
Write Your Own Review