Meziere Electric Water Pump Chrys Sb 35 Gpm Polished WP114U
MPN: WP114U
|
RPI: 192122
$1,078.80
Trackable Shipping
Australia Wide
Handling Time
1-3 Business Days Handling Time
(Prior to Dispatch)
(Prior to Dispatch)
Return Policy
30 Days Return
Click & Collect (no postage cost)
Unit 1/25 Bearing Road, Seven Hills, NSW, 2147
Ready-to-pickup: 1-3 Business Days*
*You'll receive a notification when your order is ready for pickup. For store details and opening hours, click here
American made with qualityfar superior to any otherperformance aftermarketcompany, we build our waterpumps with pride right herein the USA. Don't be misleadby inflated flow numbers andcompetitors' outlandishclaims. We say what we meanand mean what we say.
This water pump modelfeatures:
- Suitable for street or dragstrip use - 2500 hour lifeexpectancy
- Showquality polished anodisedfinish
- Standard motorprovides 35 gallons perminute free flow rating
- All stainless steelhardware included
- Light weight. Completestandard small block Moparunit weighs only 5.7 pounds!
- Stainless steellarge diameter main shaftwith high performance ceramicseal
- Pump will clearcam belt drives and mostblower drives
- 1" NPTinlet adapters are availablefor #12AN, #16AN, #20AN,1-1/4", 1-1/2" or 1-3/4" sliphose
Technical Specifications:
- BeltDrives: Standard SBM designwill clear Jesel belt drivesand comparable belt drivesystems.
- DistributorBelt Drives: Spacers will benecessary to clear belt drivedistributor systems.
- Finishing The System: Thispump is supplied completewith gaskets and hardware butwithout the inlet fitting.The fitting needs to beordered according to the sizeof the lower radiator hose.In addition, you will mostlikely need a back plate#WP115 or #WP117 to seal upthe factory timing coverwater pump chamber.
- Amperage draw: Under normaluse the pump will draw 6-7amps.
- Overall HeightDimension: The standard pumpis 6.10" long from themounting surface to the tipof the pump.
- PumpWeight: This applicationweighs 5.7 lbs.
- 16volt systems: When purchasinga pump for a 16 volt systemwe recommend the 16 voltoptional motor on our pump.The 12 volt pump will workfor limited use applications.
AdditionalNotes:
The standard 35GPM pump is suitable fornormally aspirated engines upto 650HP. Supercharged,turbocharged and highcompression, high horsepowerapplications should use the55GPM High Flow pump only.This model does not acceptheater or bypass hoses as astandard.
Accessoriesfor Small Mopar:
WaterPump Spacers:
Thickness2.25" WPS114
RelayWiring Kit upgrade WIK346
Write Your Own Review