Mektronics DeoxIT FaderLube Spray 142g DEOF5SH6
(Prior to Dispatch)
DeoxIT FaderLube Spray 142g Overview
DeoxIT Fader F-Seriesis a precision lubricant and cleaner for moving contact surfaces (faders, switches, potentiometers and other mechanisms with sliding surfaces).
It replenishes lubrication lost on surfaces that have been cleaned with solvents or other cleaning solutions.
Over time these conductive plastic components lose their original lubrication from wear and/or repeated cleaning. Dust, dirt, drink spills and other contamination also degrade the components' lubricant. The need for re-lubrication is necessary to avoid excess wear and abrasion to the plastic surfaces.
Another use for DeoxIT Fader is on conductive membrane switches and components. Oil, grease and acids build up on the membrane surfaces due to repeated finger contact and can lead to device malfunction. Applying DeoxIT Fader will provide a long-lasting barrier against these types of contamination. The oil, grease and acids will be displaced above the DeoxIT Fader layer preventing contact with the plastic membrane.
DeoxIT FaderLube Spray 142g Features
-
Formulated for Conductive Plastics/Controls
-
Maintains Optimum Signal Quality
-
Replenishes Lubrication Lost
-
Maintains Tactile Feel
-
Reduces Wear & Abrasion
-
Temperature Range, -26 C (-15 F) to +150 C (302 F)
DeoxIT FaderLube Spray 142g Applicator
Spray, provides flushing action, briefly flammable (until solvent evaporates within 2-3 minutes).
DeoxIT FaderLube Spray 142g Formulation
5% DeoxIT Fader (active ingredient), 75% odorless mineral spirits (carrier solvent), 20% propellant
DeoxIT FaderLube Spray 142g Use
Solvent is slower to evaporate, providing flushing action to remove surfaces dirt, grease and other contaminants. Is ideal for connectors and components removed from equipment or those that are easily accessible.
DeoxIT FaderLube Spray 142g Additional Notes
Use when over spray not an issue. Formulation safe on plastics. Always recommend testing for compatibility, especially on critical/sensitive parts, and vintage equipment with aging ABS plastic(s). On rubber, may swell until solvent evaporates.