Holley Fuel Injection System Holley Super Sniper 650 HP 4150 Flange Se 550-519
(Prior to Dispatch)
Holley Fuel Injection System Holley Super Sniper 650 HP 4150 Flange Se
Holley's Super Sniper EFI 650 is the #1 way to convert your blow-through carbureted turbo engine to fuel injection with just 4 simple connections required. This 4-barrel system features a dual pattern bolt on design built to fit 4150 flange and spreadbore manifolds. Super Sniper is designed specifically for lower horsepower boosted applications or someone just looking for some additional sensor inputs. Super Sniper can support up to 650HP naturally aspirated or 600HP boosted with 4 100 LB/HR Injectors.
We want everything to be as simple as it can be for you! Sniper kits are built and designed to be installed at home in your garage or driveway with limited tools and the support of Holley's comprehensive installation manual and videos. An afternoon in the garage and you will be enjoying improved engine performance, better MPG's and easier starting. After the simple installation it's time to let your Sniper begin the self-tuning process. Our user-friendly calibration wizard allows you to just answer a few questions about your engine and the system will begin self-tuning with no laptop required. You don't have to be a computer wiz or specialize in tuning to use a Sniper EFI system! Use the high resolution 3.5"" full color touchscreen for tuning and gauge displays.
Sniper EFI is part of a complete ecosystem! Your new Sniper kit pair's seamlessly together with Holley's Sniper Hyperspark Ignition, Fuel System's, Air Cleaners, Throttle Body and Digital Dash to unlock the full potential of your build. Complete your fuel injection journey by checking out our full offer of ignition, fueling and accessories!
NOTE: Not recommended for use with E-85 fuel
Features
- Supports Up To 650HP Boosted
- Self-tuning ECU means you don't have to be a computer/tuning wiz to have EFI!
- Simple Calibration Wizard (Answer a few questions about your engine, and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Only 4 Wiring Connections Required! (Battery +, Battery-, Switched Ignition and RPM)
- High-Resolution Full Color Touchscreen for initial Setup, Tuning, and Gauge Displays
- Compatible with Draw-Thru or Blow-Thru forced induction applications
- User-friendly Boost Control with handheld adjustability
- Programmable Target Air Fuel Ratios per Boost level
- Advanced boost control is available via free Sniper EFI tuning software, including Boost vs RPM and Boost vs Time - Same popular boost control offered in Holley HP and Dominator EFI systems!
- 2.5 Bar MAP sensor included which safely works on applications up to 21.5 PSI
- Built-in Single stage progressive nitrous control
- Dry or Wet Nitrous Support
- Progressive or Non-Progressive control strategies
- Lean/Rich AFR Cutoff
- Time or RPM based Timing Retard and much more!
- Integrated ignition timing control for precise timing curves
- Programmable inputs and outputs
- Three Programmable 0-5V Sensor Inputs for Oil/Fuel/Dome or Nitrous Pressure Sensors
- Six Programmable Ground Outputs
- One +5v Reference Output - +5V Power Supply for 0-5v Sensors
- One Sensor Ground - Ground supply for 0-5v Sensors
- Internal fuel pressure regulator eliminates the hassle of plumbing an external fuel pressure regulator (Preset to 58.5 PSI) for N/A or Nitrous applications
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
- OEM Style TPS/IAC and fuel pressure regulator, for years of dependable service
- Included clamp-on oxygen sensor kit ensures a leak-free oxygen sensor installation, with Stainless Steel T-Bolt clamps and a Stainless Steel (Weldable) oxygen sensor flange
- Throttle body mounted ECU - no extra boxes to mount
- USB to CAN Communication cable included for easy laptop tuning of advanced controls
- Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange and Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 recommended)
- Certified to ISO 8846, SAE J1171 and United States Coast Guard Requirements for Ignition Protection and Fire Resistance. Making Sniper EFI the perfect choice for carburetor to marine fuel injection conversions!
- A Flame Arrestor is REQUIRED for marine installations, such as part number, 720-1 or 720-13
- Compatible with Holley EFI analog gauges and electronic dashes