Haltech Elite 750 Plug n Play Adapter Harness Fits Miata/MX-5 NB HT-140621

Haltech Elite 750 Plug n Play Adapter Harness Fits Miata/MX-5 NB

Elite 750 Mazda Miata/MX-5 NB Plug 'n' Play Adaptor Harness

Suits: Plug 'n' Play replacement of the factory ECU for Mazda Miata/MX-5 NB

1.8 Non VCT or VCT (00-04)

1.8 Factory Turbo SE (Australian Delivered) & Mazdaspeed (USDM) (04-05)

with 3 Plug 3 Row ECU.

Manual transmission only.

Includes: Elite 750 ECU, injection molded plastic plug 'n' play adaptor harness, M14 x 1.5 air temp sensor with matching plug and pins, auxiliary I/O 16 Pin Tyco plug and pins. waterproof USB cap, USB programming cable and software CD.

HARNESS OVERVIEW If you are using a factory harness and are after an easy ECU upgrade - this is a product for you. These adaptors plug directly into your Haltech ECU and have a set of factory connectors on the other side which plug straight into the factory harness.

• * A simple Haltech PlugnPlay product that allows you to be up and running in just a few hours.
• * The quick start guide will walk you through installation of the Haltech PlugnPlay adaptor into your vehicle.

• ^HARNESS FEATURES
• * This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
• * Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions.