Clear View Filtration 4" Screw On Oil Filter -12 115 Micron Clear (400-115) CV400-115
(Prior to Dispatch)
4" Screw-On See ThroughFilter Assembly with #12 Portsand 115 Micron Element, forrunning 50 weight or lighteroil. For use with disposablefilters on the bottom of theSee Through Oil Filter. Dualfiltration gets all themicroscopic particles out ofthe oil. These filters aresmaller and lighter which makeit easier to mount in tightenginecompartments.
Features:
- Smallest Particles Filtered:depends on the disposablefilter microns, varies onbrand
- RecommendedDisposable Filter: (notincluded) K&N #HP-2003 or#HP-3002 or WIX #51069 or#51060
- BlackOut Seriescan use Napa Goldfilters
- DisposableFilter Thread Size: 13/16" -16 TPI
- Bypass ReliefValve: Yes
- Inlet &Outlet Fitting:
- #12O-Ring Boss - 1 -1/16" - 12TPI
- Operating Temp:max 220 degreesFahrenheit
- OperatingPressure: max 150PSI
- Height (withoutdisposable filter): 3.00in.
- Width: 5.00in.
- Length: 6.00in.
- Filter Weight:3.40 pounds
ClearView Filtration's PatentedDual Oil Filter Assemblies arethe Best Oil Filtration SystemAvailable. This 4" Screw-OnFilter Assembly was designedfor most Big and Small BlockEngine combinations, includingStreet, Dirt and Marine use.This filter is the best choicefor motorsports ran on dirtand other applications wherethe user wants to filtermicroscopic and dust particlesout of the oil system. Alsowhere space is limited andbeing light weight isimportant! Oil first flowsthrough the see through filterwhich the element traps allthe larger particles that canbe viewed and inspected whilethe microscopic particles flowinto the disposable filter andare filtered out. The cleanfiltered oil flows out of thefilter assembly through theoutlet opening back into theengine. A shot of air emptiesthe filter in seconds exposingthe element and filteredparticles without draining orleaking any oil and withoutunbolting or loosening anyfasteners or fittings. Filtersare remotely mounted and canwork on many applicationsincluding diesels. This dualstage filter will extend thelife and flow of thedisposable filter and stillallow visual inspection offiltered particles for engineinspection.
The 4"Screw-On Filters have 2 Inletand 1 Outlet Port openingsthat are threaded for #12O-Ring Boss - 1-1/16-12 TPIfittings. The Inlet and Outletopenings have been machined to0.625" or 5/8" inside diameterso it will not restrict fluidwhen using #12 lines.